McDATA Sphereon 4500 Manuel d'utilisateur télécharger pdf (Page 65)

Hardware View

2-9

Monitoring and Managing the Switch

• Port Number

The physical port number.

• Port Name

User-defined port name or description. Refer to Configure Ports on

page 3-9 for instructions.

• Type

— G_port. This displays if nothing is logged into the port.

— F_Port. This displays if a device is logged into the port.

— E_Port. This displays if the port is connected to another

switch’s E_Port via an ISL.

— FL_Port. This displays if a private loop device is logged into

the port.

• Operating Speed

Displays the current data speed for the port as 1 Gb/sec, 2

Gb/sec, or Not Established. Not Established displays if Negotiate

was set for the port through the Configure Ports dialog box and the

data speed has not been resolved between the port and the

attached device, or if the port and device are not communicating.

• Port WWN

The port’s 16-digit world-wide name (WWN).

• Block Configuration

Blocked or unblocked. Operation can be blocked or unblocked

through the Configure Ports dialog box. Refer to Configure Ports on

page 3-9 for instructions.

• LIN Alerts Configuration

This field indicates whether LIN alerts are enabled or disabled.

LIN alerts can be configured through the Configure Ports dialog

box. The default is for the LIN alerts to be enabled.

• FAN Configuration

Indicates whether Fabric Address Notification (FAN) is On or Off

when the port is operating as an FL_Port.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 215 216

Pas de commentaire

McDATA Sphereon 4500 Manuel d'utilisateur Page 65