McDATA Eclipse 2640 SAN Informations techniques télécharger pdf (Page 100)

4-22

Eclipse™ 2640 SAN Router Administration and Configuration Manual

Configuring a Backup iFCP Connection

You can configure redundant fail-over for the iFCP connection so that

one iFCP port backs up another iFCP port on the same SAN Router.

Redundant ports must be configured symmetrically; for example,

each port must back up the other. A port can have both primary and

backup connections, such as pair of ports having connections to a

remote SAN, exporting different zones to split the load. If either port

fails, the remaining port takes over the entire load.

To configure a backup for the SAN Router ports, follow these

instructions:

1. Select Configuration>iFCP>Port Redundancy to display the iFCP

Port Redundancy Configuration dialog box (

Figure 4-9).

Figure 4-9 iFCP Port Redundancy Configuration Dialog Box

2. Select the tab for each port you wish to configure.

3. To enable backup operation, select the Enable box. To disable

backup operation, clear this box.

4. Select the port that you want to backup for the port being

configured.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 275 276

Pas de commentaire

McDATA Eclipse 2640 SAN Informations techniques Page 100