McDATA OPENconnectors Command Line Interace Manuel d'utilisateur télécharger pdf (Page 394)

100

101

g-16

E/OS Command Line Interface User Manual

Glossary

the packets more quickly. Typically, a subnet may represent all the

machines at one geographic location, in one building, or on the same

local area network.

switch A device that connects, filters and forwards packets between local

area network (LAN) segments or storage area network (SAN) nodes

or devices.

switch binding A security method that limits the devices that can log in to a switch,

by specifying the node WWN of the allowed devices in the Switch

Membership List.

Switch Membership

List

The list of devices, specified by WWN, that can log in to a switch.

switch priority Value configured into each switch in a fabric that determines its

relative likelihood of becoming the fabric’s principal switch. Lower

values indicate higher likelihood of becoming the principal switch. A

value of 1 indicates the highest priority; 225 is the lowest priority. A

value of 225 indicates that the switch is not capable of acting as the

principal switch. The value 0 is illegal.

telnet A protocol designed to provide general, bi-directional, eight-bit byte

oriented communication. It is a standard method of interfacing

terminal devices and terminal-oriented processes to each other.

topology The logical, physical, or both arrangement of stations on a network.

trap Unsolicited notification of an event originating from a simple

network management protocol (SNMP) managed device and

directed to an SNMP network management station.

UPM See universal port module.

1 2 ... 389 390 391 392 393 394 395 396 397 398 399 ... 405 406

Commentaires sur ces manuels

Pas de commentaire

McDATA OPENconnectors Command Line Interace Manuel d'utilisateur Page 394

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau McDATA OPENconnectors Command Line Interace