McDATA OPENconnectors Command Line Interace Manuel d'utilisateur télécharger pdf (Page 212)

2-168

Enterprise Operating System Command Line Interface User Manual

show

Parameters This command has one parameter.

Command Example

Root> show port nodes portNumber

Output The port nodes data is displayed as a table that includes the following

properties.

portNumber Specifies the port number. Valid values are:

0–11 for the Sphereon 4300

0–15 for the Sphereon 3016

0–23 for the Sphereon 4500

0–31 for the Sphereon 3032

0–31 for the ED-5000

0–63 for the Intrepid 6064

0–127 and 132–143 for the Intrepid 6140

FC Addr The Fibre Channel address of nodes attached to

this port. Private devices are assigned address

strings of 0000 followed by the two-digit

hexadecimal Arbitrated Loop Physical Address

(ALPA), instead of the 6 digit hexadecimal

number presented for public devices.

BB Crdt Represents the maximum number of

outstanding frames which can be transmitted

without causing a buffer over-run condition at

the receiver.

RxFldSz Buffer-to-buffer Receive Data Field Size from

the FLOGI received from the attached N_Port.

COS Class of service: 1; 2; 3; 4; 5; 6; F; 1,2; 2,3…

Port Name The port worldwide name of the attached

device.

Node Name The node worldwide name of the attached

device.

1 2 ... 207 208 209 210 211 212 213 214 215 216 217 ... 327 328

Pas de commentaire

McDATA OPENconnectors Command Line Interace Manuel d'utilisateur Page 212