McDATA OPENconnectors Command Line Interace Manuel d'utilisateur télécharger pdf (Page 70)

2-26

Enterprise Operating System Command Line Interface User Manual

config

Parameters This command has two required parameters.

Command Example

Root> config port fan 4 1

config.port.name

Syntax name portNumber portName

Purpose This command sets the name for a port.

Parameters This command has two required parameters.

Command Example

Root> config port name 4 Sam’s tape drive

config.port.rxCredits

Syntax rxCredits portNumber numRxCredits

Purpose This command is used to set the number of initial BB Credits for a

given port. The number of credits assigned must fall between the

minimum and maximum allowed values for the port.

portNumber Specifies the port number. Valid values are:

0–23 for the Sphereon 4500

fanOn Specifies the FAN state for the port. Valid values

are true and false. Boolean 1 and 0 may be

substituted as values.

portNumber Specifies the port number. Valid values are:

0–11 for the Sphereon 4300

0–15 for the Sphereon 3016

0–23 for the Sphereon 4500

0–31 for the Sphereon 3032

0–63 for the Intrepid 6064

0–127 and 132–143 for the Intrepid 6140

portName Specifies the name for the port. The port name

must not exceed 24 characters in length.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 327 328

Pas de commentaire

McDATA OPENconnectors Command Line Interace Manuel d'utilisateur Page 70