McDATA OPENconnectors Command Line Interace Manuel d'utilisateur télécharger pdf (Page 55)

CLI Commands

2-11

config

Parameters This command has two parameters.

NOTE: A range of ports is not accepted as a valid input to this command

(e.g., “0-29” is not acceptable).

The port values can also be substituted with one of the following

keywords that will remove all the ports from the alert, and then use a

specific type of port instead of individual port numbers.

Valid values are:

• eport - This will add all active E ports

NOTE: A fencing policy is not allowed to contain both port types and

individual ports.

Command Example Root> config fencing addPort 24

Root> config fencing addPort eport

config.fencing.deletePolicy

Syntax deletePolicy name

Purpose This command deletes a specified fencing policy. Only disabled

fencing policies can be deleted.

name The name of the fencing policy.

portNumber The new port number to add to the

fencing policy, or all, which will add all of

the individual ports to the fencing policy.

Valid values for the port number are:

0–11 for the Sphereon 4300

0–15 for the Sphereon 3016

0–23 for the Sphereon 4500

0–31 for the Sphereon 3032

0–63 for the Intrepid 6064

0–127 and 132–143 for the Intrepid 6140

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 327 328

Pas de commentaire

McDATA OPENconnectors Command Line Interace Manuel d'utilisateur Page 55